Service Locating Sydney
Know What Is Under the Ground Before the Machine Arrives
Service locating identifies and marks buried utilities on site so excavation can proceed without striking power, gas, water, sewer or telecommunications infrastructure. Across Sydney we deliver certified service locates using Ground Penetrating Radar, Electromagnetic Induction and CCTV verification, marked to Dial Before You Dig colour standards.
Our locators work with builders, plumbers, electricians, civil contractors, pool builders and councils throughout metropolitan Sydney. Every locate is carried out by DBYD-Certified, fully insured technicians and backed by a written report you can hand to your client or your insurer.
When Sydney Projects Need a Service Locate
Before Excavation or Trenching
Any dig, trench or bore requires services identified first. We mark alignment and depth on the ground surface so operators know exactly where clearance zones sit before plant moves in.
Pre-Design and Feasibility
Locating early gives designers real constraints instead of assumed ones. Knowing where a live main sits can change a footing layout or a driveway alignment before drawings are committed.
Pool, Landscaping and Driveway Works
Residential projects sit directly over water, sewer and electrical feeds. A locate before a pool dig or driveway pour prevents the repair bills and delays that follow a strike.
Council and DA Requirements
Many Sydney councils require evidence of service location before approving works. We supply reports and plans formatted for submission alongside your application.
Post-Strike Verification
Where a service has already been damaged or its location is disputed, we verify what is actually in the ground and document it for insurance and remediation purposes.
Detection Methods Matched to the Site, Not the Job Sheet
No single method finds everything. Electromagnetic Induction traces metallic services and plastic pipes carrying tracer wire, and is our first pass on most Sydney sites. Ground Penetrating Radar picks up non-conductive assets such as PVC stormwater, PE gas and concrete drainage that EMI will not see.
For internal confirmation we run CCTV through stormwater and sewer lines to establish route, depth and condition. Sonde tracing locates the camera head from the surface for precise marking. Where physical proof is required, potholing confirms the asset visually and supports an AS 5488 Quality Level A verification.
Book a Certified Service Locate Anywhere in Sydney
Protect your program, your crew and your budget with an accurate locate before works begin. Call now or request a quote for service locating across Sydney.
What Every Sydney Locate Delivers
On-site markings are applied in Dial Before You Dig colours with depth indications and a clear utility legend, so anyone on site can read them without a briefing. Where a service cannot be confirmed, that uncertainty is marked and stated rather than left implied.
Reporting is delivered in PDF as standard, with CAD or GeoJSON available where the results feed into design. Each report records the detection method used, the AS 5488 Quality Level assigned, the scope covered and the date completed.
Compliance Obligations and Strike Prevention
Service locating in Australia is governed by AS 5488.1:2019. We assign Quality Levels from QL-D, based on asset owner plans, through to QL-A, confirmed by physical exposure, and we tell you which one applies to each service rather than blending them.
Failing to identify buried services carries safety consequences and financial exposure for the excavator, the head contractor and the asset owner. A documented locate is the evidence that reasonable steps were taken.
Pricing and Availability for Service Locating in Sydney
Standard callouts using GPR and EMI begin from $XYZ, covering on-site marking and a basic PDF report. Half-day and full-day rates apply to larger sites, multi-utility scopes and civil corridors. CCTV inspection, potholing and CAD deliverables are quoted as add-ons.
Same-day and next-day bookings are available across metropolitan Sydney. Most residential locates are completed within one to three hours. Commercial, council and civil jobs vary with site access, service density and traffic management requirements, and we confirm a realistic time estimate at booking.